KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #12: Thu Jan  1 09:00:00 JST 1970
    nork@dummy:/usr/obj/arm/usr/src/sys/SIDEARMS arm
Preloaded elf kernel "elf kernel" at 0xc0bff504.
CPU: Feroceon 88FR131 rev 1 (write-through core)
  WB enabled EABT branch prediction enabled
  16KB/32B 4-way Instruction cache
  16KB/32B 4-way write-back-locking-C Data cache
real memory  = 536870912 (512 MB)
Physical memory chunk(s):
00000000 - 0x8fffff, 9437184 bytes (2304 pages)
0xcf3000 - 0x1f64bfff, 513118208 bytes (125273 pages)
avail memory = 520306688 (496 MB)
SOC: (0x6281:0x02) Marvell 88F6281 rev A0, TClock 200MHz
nfslock: pseudo-device
mem: <memory>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mbus0: <Marvell Internal Bus (Mbus)> on motherboard
ic0: <Marvell Integrated Interrupt Controller> at mem 0xf1020200-0xf102023b on mbus0
timer0: <Marvell CPU Timer> at mem 0xf1020300-0xf102032f irq 1 on mbus0
timer0: [FILTER]
rtc0: <Marvell Integrated RTC> at mem 0xf1010300-0xf1010307 on mbus0
rtc0: registered as a time-of-day clock (resolution 1000000us)
gpio0: <Marvell Integrated GPIO Controller> at mem 0xf1010100-0xf101011f irq 35,36,37,38,39,40,41 on mbus0
gpio0: [FILTER]
gpio0: [FILTER]
gpio0: [FILTER]
gpio0: [FILTER]
gpio0: [FILTER]
gpio0: [FILTER]
gpio0: [FILTER]
uart0: <16550 or compatible> at mem 0xf1012000-0xf101201f irq 33 on mbus0
uart0: [FILTER]
uart0: fast interrupt
uart0: console (115740,n,8,1)
uart1: <16550 or compatible> at mem 0xf1012100-0xf101211f irq 34 on mbus0
uart1: [FILTER]
uart1: fast interrupt
ehci0: <Marvell Integrated USB 2.0 controller> at mem 0xf1050000-0xf1050fff irq 48,19 on mbus0
ehci0: [FILTER]
ehci0: [MPSAFE]
ehci0: [ITHREAD]
ehci0: 5.24 GL USB-2 workaround enabled
usbus0: EHCI version 1.0
usbus0: set host controller mode
usbus0: <Marvell Integrated USB 2.0 controller> on ehci0
mge0: <Marvell Gigabit Ethernet controller> at mem 0xf1072000-0xf1073fff irq 12,13,14,11,46 on mbus0
mge0: bpf attached
mge0: Ethernet address: 00:50:43:01:dd:c9
miibus0: ma.mii_phyno = 0x0, bmsr = 0x0
miibus0: ma.mii_phyno = 0x1, bmsr = 0x0
miibus0: ma.mii_phyno = 0x2, bmsr = 0x0
miibus0: ma.mii_phyno = 0x3, bmsr = 0x0
miibus0: ma.mii_phyno = 0x4, bmsr = 0x0
miibus0: ma.mii_phyno = 0x5, bmsr = 0x0
miibus0: ma.mii_phyno = 0x6, bmsr = 0x0
miibus0: ma.mii_phyno = 0x7, bmsr = 0x0
miibus0: ma.mii_phyno = 0x8, bmsr = 0x796d
miibus0: ma.mii_id1 = 0x141, ma.mii_id2 = 0xe40
miibus0: ma.mii_phyno = 0x9, bmsr = 0x0
miibus0: ma.mii_phyno = 0xa, bmsr = 0x0
miibus0: ma.mii_phyno = 0xb, bmsr = 0x0
miibus0: ma.mii_phyno = 0xc, bmsr = 0x0
miibus0: ma.mii_phyno = 0xd, bmsr = 0x0
miibus0: ma.mii_phyno = 0xe, bmsr = 0x0
miibus0: ma.mii_phyno = 0xf, bmsr = 0x0
miibus0: ma.mii_phyno = 0x10, bmsr = 0x0
miibus0: ma.mii_phyno = 0x11, bmsr = 0x0
miibus0: ma.mii_phyno = 0x12, bmsr = 0x0
miibus0: ma.mii_phyno = 0x13, bmsr = 0x0
miibus0: ma.mii_phyno = 0x14, bmsr = 0x0
miibus0: ma.mii_phyno = 0x15, bmsr = 0x0
miibus0: ma.mii_phyno = 0x16, bmsr = 0x0
miibus0: ma.mii_phyno = 0x17, bmsr = 0x0
miibus0: ma.mii_phyno = 0x18, bmsr = 0x0
miibus0: ma.mii_phyno = 0x19, bmsr = 0x0
miibus0: ma.mii_phyno = 0x1a, bmsr = 0x0
miibus0: ma.mii_phyno = 0x1b, bmsr = 0x0
miibus0: ma.mii_phyno = 0x1c, bmsr = 0x0
miibus0: ma.mii_phyno = 0x1d, bmsr = 0x0
miibus0: ma.mii_phyno = 0x1e, bmsr = 0x0
miibus0: ma.mii_phyno = 0x1f, bmsr = 0x0
miibus0: <MII bus> on mge0
e1000phy0: <Marvell 88E1116R Gigabit PHY> PHY 8 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mge0: [MPSAFE]
mge0: [ITHREAD]
mge0: [MPSAFE]
mge0: [ITHREAD]
mge1: <Marvell Gigabit Ethernet controller> at mem 0xf1076000-0xf1077fff irq 16,17,18,15,47 on mbus0
mge1: bpf attached
mge1: Ethernet address: 00:50:43:01:dd:ca
miibus1: ma.mii_phyno = 0x0, bmsr = 0x0
miibus1: ma.mii_phyno = 0x1, bmsr = 0x0
miibus1: ma.mii_phyno = 0x2, bmsr = 0x0
miibus1: ma.mii_phyno = 0x3, bmsr = 0x0
miibus1: ma.mii_phyno = 0x4, bmsr = 0x0
miibus1: ma.mii_phyno = 0x5, bmsr = 0x0
miibus1: ma.mii_phyno = 0x6, bmsr = 0x0
miibus1: ma.mii_phyno = 0x7, bmsr = 0x0
miibus1: ma.mii_phyno = 0x8, bmsr = 0x0
miibus1: ma.mii_phyno = 0x9, bmsr = 0x0
miibus1: ma.mii_phyno = 0xa, bmsr = 0x0
miibus1: ma.mii_phyno = 0xb, bmsr = 0x0
miibus1: ma.mii_phyno = 0xc, bmsr = 0x0
miibus1: ma.mii_phyno = 0xd, bmsr = 0x0
miibus1: ma.mii_phyno = 0xe, bmsr = 0x0
miibus1: ma.mii_phyno = 0xf, bmsr = 0x0
miibus1: ma.mii_phyno = 0x10, bmsr = 0x0
miibus1: ma.mii_phyno = 0x11, bmsr = 0x0
miibus1: ma.mii_phyno = 0x12, bmsr = 0x0
miibus1: ma.mii_phyno = 0x13, bmsr = 0x0
miibus1: ma.mii_phyno = 0x14, bmsr = 0x0
miibus1: ma.mii_phyno = 0x15, bmsr = 0x0
miibus1: ma.mii_phyno = 0x16, bmsr = 0x0
miibus1: ma.mii_phyno = 0x17, bmsr = 0x0
miibus1: ma.mii_phyno = 0x18, bmsr = 0x796d
miibus1: ma.mii_id1 = 0x141, ma.mii_id2 = 0xe40
miibus1: ma.mii_phyno = 0x19, bmsr = 0x0
miibus1: ma.mii_phyno = 0x1a, bmsr = 0x0
miibus1: ma.mii_phyno = 0x1b, bmsr = 0x0
miibus1: ma.mii_phyno = 0x1c, bmsr = 0x0
miibus1: ma.mii_phyno = 0x1d, bmsr = 0x0
miibus1: ma.mii_phyno = 0x1e, bmsr = 0x0
miibus1: ma.mii_phyno = 0x1f, bmsr = 0x0
miibus1: <MII bus> on mge1
e1000phy1: <Marvell 88E1116R Gigabit PHY> PHY 24 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mge1: [MPSAFE]
mge1: [ITHREAD]
mge1: [MPSAFE]
mge1: [ITHREAD]
twsi0: <Marvell Integrated I2C Bus Controller> at mem 0xf1011000-0xf101101f on mbus0
iicbus0: <Philips I2C bus> on twsi0
iic0: <I2C generic I/O> on iicbus0
sata0: <Marvell Integrated SATA Controller> at mem 0xf1080000-0xf1085fff irq 21 on mbus0
sata0: [MPSAFE]
sata0: [ITHREAD]
ata0: <Marvell Integrated SATA Channel> on sata0
ata0: hardware reset ...
ata0: SATA connect timeout status=00000000
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <Marvell Integrated SATA Channel> on sata0
ata1: hardware reset ...
ata1: SATA connect timeout status=00000000
ata1: [MPSAFE]
ata1: [ITHREAD]
pcib0: <Marvell 88F6281 PCI-Express host controller> at mem 0xf1040000-0xf1041fff on mbus0
pcib0: PCI IO/Memory space exhausted
device_attach: pcib0 attach returned 12
Timecounter "CPU Timer" frequency 200000000 Hz quality 1000
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0: Identifying devices: 00000000
ata0: New devices: 00000000
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
usbus0: 480Mbps High Speed USB v2.0
bootpc_init: wired to interface 'mge0'
Sending DHCP Discover packet from interface mge0 (00:50:43:01:dd:c9)
ugen0.1: <Marvell> at usbus0
uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 1 port with 1 removable, self powered
Received DHCP Offer packet on mge0 from 192.168.36.249 (accepted) (no root path)
ugen0.2: <vendor 0x0424> at usbus0
uhub1: <vendor 0x0424 product 0x2517, class 9/0, rev 2.00/0.01, addr 2> on usbus0
uhub1: 7 ports with 7 removable, self powered
Sending DHCP Request packet from interface mge0 (00:50:43:01:dd:c9)
Received DHCP Ack packet on mge0 from 192.168.36.249 (accepted) (got root path)
mge0 at 192.168.36.32 server 192.168.36.249 boot file kernel.bin
subnet mask 255.255.255.0 router 192.168.36.1 rootfs 192.168.36.249:/sandbox/mv88f6281 rootopts nolockd 
Adjusted interface mge0
Trying to mount root from nfs:. Press CTRL+C to abort.
NFS ROOT: 192.168.36.249:/sandbox/mv88f6281
ct_to_ts([2010-02-01 17:03:17]) = 1265043797.000000000
ct_to_ts([2010-02-01 17:03:17]) = 1265043797.000000000
start_init: trying /sbin/init